Notor 36 recessed Beta Opti Nano

Adapt and optimise Notor 36 by using Fagerhult Configure. For example, choose among colour temperatures, optics, luminous fluxes and various accessories. The linear luminaires can be used as single luminaires or in systems. The other shapes are in the system configuration. All choices are saved in a product datasheet, which can be downloaded together with unique light data files. The articles listed below are examples.

Installation

Recessed installation in suspended ceilings. Unventilated or ventilated ceilings. For installation in suspended ceilings with visible T-bars, VTB (24 mm) or one-piece suspended ceilings.

Connection

For permanent connection with 230 V; built-in LED ballast in luminaire. Single and Start luminaires in systems are equipped with 2.5 m connection cable 5 x 0.75 mm². System units are equipped with a change-over cable (5 x 1.5 mm²) and a quick-connector between the luminaire units.
303 and 440 - Connection in separate driver box. Snap-in terminal block 3x1.5 mmm² (x2), onward connection possible. 5x1.5 mm² (x2) when dimming. Can also be supplied with chassis mounted snap-in connector in the ballast where a T-splitter or mains cable and plug are possible. The luminaire body and driver are interconnected with a snap-in connector.
Use Configure for options on the type of connection cable.

Design

Frame painted in white (RAL 9016), silver (RAL 7035 metallic) or black (RAL 9005). Endcaps included in Start/Single luminaires.

Louvre

Beta Opti Nano – side and cross blades in satin matte, metallised aluminium with an integrated opal surface that minimises the risk of uncomfortable glare from the LEDs and multiple shadows.

Light distribution

Direct.

Dimming

CLO (Constant Light Output) and DALI/phase pulse control as standard. CLO means that the luminaire provides the same amount of light for the duration of its service life.
e-Sense Active – PIR sensor with presence and daylight control via DALI. Mounted in a separate unit.
Organic Response – PIR sensor with presence and daylight control. Mounted in a separate unit. All luminaires have master/slave functionality with IR communications. Either cont. or end. A sensor handles up to 4 luminaires. See installation instructions for more information.

LED-information

The LEDs are protected from contact.

Miscellaneous

NOTE! Do not combine Low Lumen (LL) and High Lumen (HL) luminaires in a series installation.